Containment, removal, and drying that keeps mold from coming back

Mold Remediation Marietta GA That Fixes the Source

When mold shows up on drywall, baseboards, or subfloor, mold remediation Marietta GA crews handle it as a moisture problem first and a cleanup second. We find the hidden leak or condensation source, contain the affected area, remove contaminated materials, and dry the structure to verified levels. Homeowners and property managers across Cobb County call us for black mold remediation Marietta jobs that keep coming back, and we shut the cycle down at the source.

Mold Remediation in Marietta, Georgia
Careful work. Honest options.
About this service

What Mold Remediation Marietta GA Really Involves

Mold remediation Marietta GA is the contained removal of mold growth and the correction of the moisture condition feeding it. It is not a wipe-down with bleach. Our technicians set up negative-air containment, run HEPA filtration, and remove porous materials like drywall, insulation, and baseboard that mold has colonized. We map moisture with a moisture meter and thermal imaging camera, treat structural framing with an antimicrobial solution, then dry the cavity until a hygrometer confirms the assembly is back to normal. If the source was a slab leak, burst pipe, or ceiling water leak, that gets fixed or documented before we close anything up.

Mold needs three things: moisture, food, and time. Marietta's humid summers and older housing stock supply all three. Crawlspaces under 1960s ranches off Franklin Road stay damp, and slab leaks under tile floors in East Cobb condos feed mold for weeks before anyone sees a stain. We get called for mold cleanup Marietta Georgia jobs after water heater leaks, storm water intrusion, and basement flooding. If you have been searching mold remediation Marietta GA near me at 11 p.m. because the smell hit you, that is the right instinct. Mold does not stop at the drywall surface.

  • ✓ Verified Dry Standards
  • ✓ Containment That Holds
  • ✓ Source Correction
  • ✓ Insurance-Ready Documentation
What's included

What Our Mold Remediation Service Includes

Every mold job includes inspection, containment, removal of affected materials, antimicrobial treatment, drying, and verification. Reconstruction like drywall replacement or painting is scoped separately so you see the line between remediation and repair. Here is what you get as standard.

01
✓

Moisture Inspection and Mapping

A certified technician uses a moisture meter, thermal imaging camera, and borescope camera to locate the source and map how far mold has spread. You get readings, photos, and a written scope the same day.

02
✓

Negative-Air Containment

Poly barriers and HEPA filtration keep spores from spreading during removal. Containment stays up through the drying phase, not just tear-out, so clean rooms stay clean.

03
✓

Removal of Contaminated Materials

Drywall, insulation, baseboard, and other porous materials with mold growth are removed, bagged, and disposed of. Structural framing gets HEPA-vacuumed and treated with an antimicrobial solution.

04
✓

Structural Drying

Air movers and dehumidifiers run until moisture readings match dry standard. We check daily with a hygrometer and adjust equipment so drying is verified, not assumed.

05
✓

Clearance Verification

Final moisture readings, photos, and a clearance summary document the job. You get a walkthrough of what was removed, what was dried, and what to watch going forward.

How it works

How Our Mold Remediation Process Runs

A certified technician walks the space with a moisture meter, thermal imaging camera, and borescope camera to find where the water is coming from and how far the mold has spread. You get readings, photos, and a written scope the same day. Most inspections take 45 to 90 minutes depending on square footage.

We seal off the affected area with poly barriers and run negative air pressure using HEPA filtration. This keeps spores from drifting into clean rooms during removal. On a typical bedroom or bathroom job, containment goes up in under two hours and stays until drying is verified.

Contaminated drywall, insulation, and baseboard come out and get bagged. Structural framing gets HEPA-vacuumed and treated with an antimicrobial solution. We use a borescope camera to check inside wall cavities so we are not guessing about what is behind the drywall. Removal on a 150-square-foot area usually runs one to two days.

Air movers and dehumidifiers run until moisture readings match dry standard. We check with a hygrometer daily and adjust equipment placement. Most structural drying takes three to five days. You get daily readings so you can see the progress, not just take our word for it.

Final moisture readings, photos, and a clearance summary close the job. We walk you through what was removed, what was dried, and what to watch. If a repair like drywall replacement or a vapor barrier install is needed, we scope it clearly so you know what comes next.

Mold Remediation
STEP 01Inspection and Moisture Mapping

A certified technician walks the space with a moisture meter, thermal imaging camera, and borescope camera to find where the water is coming from and how far the mold has spread. You get readings, photos, and a written scope the same day. Most inspections take 45 to 90 minutes depending on square footage.

Tools & methods

Tools and Methods We Use for Mold Remediation

01
✓

Moisture Meter

Reads moisture content in drywall, wood, and subfloor so we know where mold risk is highest and when materials are dry.

02
✓

Thermal Imaging Camera

Finds temperature differences behind walls that indicate hidden moisture from a slab leak, pipe leak, or roof leak.

03
✓

Borescope Camera

Lets us see inside wall cavities without full tear-out so we can confirm mold growth and scope removal accurately.

04
✓

HEPA Filtration and Negative Air Machines

Keeps spores contained during removal and filters the air inside containment so clean rooms stay clean.

05
✓

Dri-Eaz and Phoenix Restoration Equipment Dehumidifiers

Professional-grade dehumidifiers that pull moisture from structural materials faster than consumer units.

06
✓

Air Movers

Increase evaporation at wall cavities and floors so drying happens in days, not weeks.

Real results

Before and after.

Slab Leak Mold in East Cobb Condo
Mold Remediation

Slab Leak Mold in East Cobb Condo

A pinhole slab leak under a hallway floor fed moisture into the baseboards and lower drywall for weeks. Visible mold covered about 40 square feet, and the musty smell reached the adjacent bedroom.

After: We contained the hallway, removed affected drywall and baseboard, treated framing, and dried the cavity over four days. Final moisture readings matched dry standard, and the smell was gone.

Book this service →
Crawlspace Mold After Sump Pump Failure
Mold Remediation

Crawlspace Mold After Sump Pump Failure

A failed sump pump left standing water in a Sandy Plains crawlspace after a storm. Mold grew on joists and subfloor across roughly 600 square feet, and the living space above smelled musty.

After: We removed growth, treated joists with antimicrobial solution, corrected the vapor barrier, and dried the space to normal humidity over five days. The musty smell cleared.

Book this service →
Water Heater Leak Mold in Downtown Marietta
Mold Remediation

Water Heater Leak Mold in Downtown Marietta

A water heater leak in a closet soaked the subfloor and baseboard over a weekend. Mold showed on the baseboard and lower drywall within a week, covering about 25 square feet.

After: We extracted water, removed wet baseboard and drywall, treated framing, and dried the subfloor in three days. Moisture readings were verified before we closed the job.

Book this service →
Problems we solve

Mold Problems We Solve After Water Damage

Mold after water damage is the most common call we get. The pattern is always the same: water sat too long, or the moisture was never fully dried. Here is what we fix.

Ask a pro →
01

Mold behind drywall after a hidden leak

We use a thermal imaging camera and borescope camera to find the moisture without tearing out the whole wall. Containment goes up, affected drywall and insulation come out, framing gets treated, and the cavity is dried to verified readings.

↗
02

Crawlspace mold from high humidity

We remove mold growth from joists, treat with antimicrobial solution, correct the vapor barrier, and dry the space. If a sump pump failed, we document it so the fix is permanent.

↗
03

Mold after a water heater leak

We extract standing water, remove wet baseboard and drywall as needed, treat affected framing, and dry the subfloor to verified levels. Most of these jobs are contained to one room and finish in three to five days.

↗
04

Black mold after storm water intrusion

We extract, clean, and dry, then treat affected framing. If black mold growth is present, we contain and remove it as part of the same job so you are not hiring two crews.

↗
Transparent pricing

What Mold Remediation Costs in Marietta

$1,200 - $6,500 depending on scope

Mold remediation pricing depends on square footage, materials affected, and whether reconstruction is needed. Typical 2026 pricing in this area runs $1,200 to $6,500 for most residential jobs. A small bathroom ceiling job sits near the low end. A crawlspace or multi-wall job with subfloor removal runs higher. We give you a written scope and price before work starts, and if we find more mold behind a wall, we stop and show you before proceeding. That is how mold remediation cost Marietta Georgia estimates should work: clear numbers, no surprise add-ons.

The price reflects containment, removal, antimicrobial treatment, drying equipment, daily monitoring, and clearance verification. A cheap spray-and-leave job usually fails within months because the moisture source was never corrected. We fix the source and document the dry standard so the work holds.

Square footage affected

•affects cost

More area means more containment, removal, and drying time. A 50-square-foot bathroom job is a different scope than a 600-square-foot crawlspace.

Get a quote ↗
Moisture source

•affects cost

A slab leak or burst pipe may require plumbing repair before remediation. If the source is not fixed, mold returns and the job is wasted.

Get a quote ↗
Reconstruction needs

•affects cost

Drywall replacement, painting, and baseboard install are scoped separately from remediation so you see the line between the two.

Get a quote ↗
Proof you can check

Credentials and Customer Proof

  • IICRC WRT (Water Restoration Technician) · Institute of Inspection, Cleaning and Restoration Certification
  • IICRC ASD (Applied Structural Drying) · Institute of Inspection, Cleaning and Restoration Certification
  • IICRC AMRT (Applied Microbial Remediation Technician) · Institute of Inspection, Cleaning and Restoration Certification
  • EPA Lead-Safe Certification · U.S. Environmental Protection Agency
  • Georgia state contractor license · Georgia Secretary of State
Customer reviews

What Marietta Customers Say

★★★★★
“We had a slab leak under the hallway floor and mold showed up on the baseboards a few weeks later. The crew found the moisture with a thermal camera, contained the hallway, and removed the affected drywall. Daily readings meant we knew it was drying. Took five days total. They documented everything for our insurance and the claim went through without a fight.”
DR

Dana R.Homeowner, East Cobb

✓ Verified
★★★★★
“Our crawlspace had mold after a sump pump failed during a storm. I called around and most places just wanted to spray it. These guys actually fixed the vapor barrier and dried the joists before treating. They showed me the moisture meter readings before and after. That is why I would call them again for mold cleanup in Marietta.”
PS

Priya S.Homeowner, Sandy Plains

✓ Verified
Good questions

Mold Remediation Questions Marietta Homeowners Ask

(725) 309-8505 →

We do, and we handle both the mold removal and the water damage that caused it. Our technicians are IICRC certified and work across Cobb County. We inspect, contain, remove, and dry, then verify moisture readings before we call it done. If you need mold remediation Marietta GA near me service, call and we can usually inspect the same day.

Typical 2026 pricing for mold remediation in Marietta runs $1,200 to $6,500 depending on square footage, materials affected, and whether reconstruction is needed. A small bathroom ceiling job sits near the low end. A crawlspace or multiple-wall job with subfloor removal runs higher. We give you a written scope and price before work begins.

Most sudden-discharge water claims that led to mold growth are covered, but long-term seepage and maintenance issues usually are not. If a burst pipe or water heater leak caused the mold, document it fast. We photograph affected materials and build the scope in Xactimate to support your claim. Your adjuster makes the final call, but clear documentation helps.

Most mold remediation jobs take three to seven days from containment to clearance. Removal on a small area runs one to two days, and structural drying adds three to five days. Larger crawlspace or multi-room jobs can run longer. We give you a day-by-day schedule after inspection so you can plan around it.

Ready when you are

Get Mold Remediation Marietta GA Started Today

Mold spreads while you wait. Call us for a same-day inspection with moisture readings and a written scope. We are licensed, insured, and IICRC certified, and we serve all of Cobb County.

Schedule Inspection (725) 309-8505 →
Request an appointment

Call for Water Damage Help

We answer the phone 24/7 and dispatch crews across Marietta and Cobb County. Tell us what leaked, how long it has been running and whether the power is safe, and we will send the nearest truck with extraction equipment on board. Most calls get a technician on site within the hour.

Request received — our team will be in touch shortly.
↗
Emergency?Call now